AAT001-10E-EVB01: 1.25 MOhm TDFN6 TMR Angle Sensor Eval Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AAT001-10E 1.25 MOhm Tunneling Magnetoresistance (TMR) analog angle sensor. The board has a pre-soldered sensor and footprints for a standard 0.1" (2.54 mm) header and a common, 1 mm pitch card-edge connector.

The board can be powered by a 0 to 5.5 V supply and provides sine and cosine analog outputs.
AAT001-10E-EVB01: 1.25 MOhm TDFN6 TMR Angle Sensor Eval Board
AAT001-10E-EVB01 Data Sheet (.pdf)

Related Products

AAT001-10E: Angle Sensor, 1.25 MOhm, TDFN6
AAT001-10E: Angle Sensor, 1.25 MOhm, TDFN6

AAT001-10E Angle Sensors use Tunneling Magnetoresistance (TMR) technology to produce a very high output signal without amplification, a wide airgap tolerance, and very high device

$8.94
View
AAT003-10E: Angle Sensor, 40 kOhm, TDFN6
AAT003-10E: Angle Sensor, 40 kOhm, TDFN6

AAT003-10E Angle Sensors use Tunneling Magnetoresistance (TMR) technology to produce a very high output signal without amplification, a wide airgap tolerance, and low power. Sine

$8.94
View
AAT006-10E-EVB01: 1.5 mT TDFN6 TMR Angle Sensor Eval Board
AAT006-10E-EVB01: 1.5 mT TDFN6 TMR Angle Sensor Eval Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AAT006-10E1.5 mT, 1.25 MOhm Tunneling Magnetoresistance (TMR) analog angle sensor. The

$19.95
View
AAT009-10E-EVB01: 6 MOhm TDFN6 TMR Angle Sensor Eval Board
AAT009-10E-EVB01: 6 MOhm TDFN6 TMR Angle Sensor Eval Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AAT009-10E 6 MOhm Tunneling Magnetoresistance (TMR) analog angle sensor. The board

$19.95
View
AAT101-10E-EVB01: Full-Bridge TDFN6 TMR Angle Sensor Eval Board
AAT101-10E-EVB01: Full-Bridge TDFN6 TMR Angle Sensor Eval Board

A 0.8 x 0.4 inch (21 x 10 mm) breakout board with the AAT101-10E Full-Bridge Tunneling Magnetoresistance (TMR) analog angle sensor. The board has

$19.95
View
Part Number: AAT001-10E-EVB01
Quantity In Stock: 29
 $19.95 
Quantity:


Contact us for higher volume pricing.